BHQNB - PTFE TAPE THREAD SEAL
- MSDS: BHQNB
- Manufacturer: GARLOCK PLASTOMER PRODUCTS
- Product Name: PTFE TAPE THREAD SEAL
- National Stock Number: 8030-00-889-3534
Product Identification
Product ID:PTFE TAPE THREAD SEAL
MSDS Date:01/01/1987
FSC:8030
NIIN:00-889-3534
MSDS Number: BHQNB
Responsible Party
NEWTOWN, PA 18940
US
Emergency Phone: 215-968-5011
Info Phone: 215-968-5011
Cage: GARLO
Contractor
Telephone: 215-968-5011
Cage: GARLO
Ingredients
POLYTETRAFLUOROETHYLENE
CAS: 116-14-3
RTECS: KX4025000
Fraction By Weight: 100%
OSHA PEL NA
ACGIH TLV: NA
VOC. ORGANIC CMPD 5.84 LB/GAL LESS WATER & NPRS* 701 G/L
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Health Hazards Acute and Chronic:FLU LIKE TRANSIENT SICKNESS. COULD BE
FATAL
Effects of Overexposure:EYE: MECHANICAL IRRITATION; SKIN: PROBABLY
NON-IRRITATING & NON-ABSORBING INHAL: NON TOXIC EFFECT FROM
DUSTS; INGST: PTFE HAS BEEN SHOWN TO BE INERT WHEN INGESTED BY RATS
Medical Cond Aggravated by Exposure:RESPIRATORY INFLAMMATION
First Aid
First Aid:MOVE TO FRESH AIR, REFER TO A PHYSICIAN
Fire Fighting
Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NO
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE.
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS WITH FULL
FACEPIECE AND PROTECTIVE CLOTHING IF INVOLVED WITH OTHER
MATERIALS.
Unusual Fire/Explosion Hazard:PRODUCT WILL EMIT TOXIC FUMES AT HIGH
TEMPERATURES, ABOVE 800F DEGREES.
Accidental Release
Spill Release Procedures:SWEEP UP TO PREVENT SLIPPAGE ON TAPE.
Handling
Handling and Storage Precautions:NO UNUSUAL PRECAUTIONS
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NA
Ventilation:NA
Protective Gloves:NA
Eye Protection:NA
Other Protective Equipment:NA
Work Hygienic Practices:NO SMOKING WHILE HANDLING MATERIAL
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:642F/341C
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:2.1-2.2
Viscosity:NO
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE
Stability
Stability Indicator/Materials to Avoid:YES
MOLTEN ALKALI METALS, INTERHALOGEN COMPOUNDS
Stability Condition to Avoid:HEATING ABOVE 750F FOR PROLONGED PERIODS
Hazardous Decomposition Products:PRODUCT WILL EMIT TOXIC FUMES AT HIGH
TEMPERATURES ABOVE 800F DEGREES.
Disposal
Waste Disposal Methods:CONFIRMING TO ALL APPLICABLE REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.